sales@hydgetpower.com    +86-21-58660061
enLanguage
Cont

Have any Questions?

+86-21-58660061

GK-3000 Polycarboxylate Based High Performance Water Reducing Admixture

GK-3000 Polycarboxylate Based High Performance Water Reducing Admixture

GK-3000 is a high performance water reducing admixture, for plastification of concrete and mortar. It shows a superior dispersion capability and thus high water reducing rate including a prolonged workability.GK-3000 is widely used in various premixed concrete and cast-in-situ concrete for civil architecture, hydropower projects, port, high speed railway, expressway, etc., specifically focused on precast and high performance concrete.
Send Inquiry

Product Introduction

DESCRIPTION:

 

GK-Ais a high sulfate containing formaldehyde naphthalene sulfonate condensate superplasticizer. It offers good performance and high water reducing capacity.GK-Ais widely used in bulk concrete, hydraulic concrete, industrial flooring and RCC concrete, whereby predictable set time and low hydraulic rates are required.

 

CHARACTERISTICS:

 

GK-3000 offers the following advantages:

* Water reduction capacity of above 25% can be reached;

* Improvement of concrete surface appearance;

* Improvement of workability of fresh concrete, avoiding bleeding;

* Prolonged slump retention;

* No negative effect on the final strength of concrete;

* No additional shrinkage.

 

PRODUCT DATA

 

Chemical Base Poly-carboxylate-ether-based polymers
Appearance/ Colour Liquid/colorless to light yellow
Packaging Barrel 225kg, IBC 1200kg or bulk transport
Storage conditions Store in dry conditions, protected from direct sunlight, water and frost
Shelf- life At least 12 months if stored properly. If expired, it can only be used after inspection.
pH Value (at 25°C) 4—7
Density (at 25℃) 1.12— 1.20g/cm3
Solid Content 10%—25% (See CoA for details)
Chloride Content ≤ 0. 1%
Alkali content ≤ 2%

 

 

APPLICATION

 

RECOMMEND DOSAGE

 

0.5%—2.5% by weight of cementitious materials

 

USING METHOD:

 

1. Follow the construction specifications strictly.

2. Pay attention to the hardening process of fresh concrete; especially at high temperature, avoid plasticity and dry shrinkage by curing the concrete with water.

3. GK-3000 can be combined with all other GK admixtures as following:

 

— GK-Pumping Agent

— GK- Waterproofing gent

— GK- Early Strength Enhancing Agent.

 

If combined with the above, it is suggested to determine the performance experimentally or consult our technical service department.

4. If overdosed, the workability of concrete will be affected, but no additional air. entrained GK-dispersion Agent can be used.

5. GK-3000 is compatible with sulfate resistant cement.

 

Basis of Product Data:All technical data stated in this Technical Data Sheet is based on standard laboratory tests. Actual measured data may vary due to circumstances beyond our control.

 

Local Restrictions:Please note that as a result of specific local regulations the declared data for this product may vary from country to country. Please consult the local Technical Data Sheet for the exact product data.

 

Health and Safety:For information and advice on the safe handling, storage and disposal of chemical products, users should refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

 

Protective Measures:Avoid contact with the skin. Please wash immediately with clear water when the product contacts skin and/or eyes. It should timely be taken medical treatment if any allergies and/or other adverse reactions happen

 

Ecology/ Waste Disposal :Do not dispose of into water or soil, but according to local regulations.

 

Transportation Class :Non-hazardous.

 

Toxicity:Non-toxic.

 

DISCLAIMER:

The information, and, in particular, the recommendations relating to the application and end- use of Hydget products, are given in good faith based on Hydget’s current knowledge and experience of the products when properly stored,handled and applied under normal conditions in accordance with Hydget ’ s recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose,nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product ’s suitability for the intended application and purpose. Hydget reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Technical Data Sheet for the product concerned, copies of which will be supplied on request.

Hot Tags: gk-3000 polycarboxylate based high performance water reducing admixture, China, suppliers, manufacturers, factory, price, made in China

Send Inquiry

(0/10)

clearall