DESCRIPTION:
GK-KSW represents an oyster white liquid, which can inhibit water and ions of the environment from penetrating inside the concrete structure, creating concrete with good performance of acid and alkali resistance, salt ion erosion, anti-freezing melts loop damage and high anti-penetration. In addition, it can greatly improve the durability and construction performance of the concrete, but has no negative effect on its compressive strength. GK-KSW reacts with the hydrate to create a strong waterproof film on the surface of the capillary pores. It forms a > 90° contact angle between the film and water, which prevents the water from permeating into the internal capillaries or pores of the structure.
USES
GK-KSW is especially suitable for salinized soil areas, high altitude and cold areas, degraded areas of soil and groundwater, coastal areas, concrete engineering that requires both anti-corrosion and anti-seepage under Marine erosion environment. In addition, it can be widely used in coal measure stratum, sulphide stratum, gypsum stratum, silt carbon stratum, pipeline/underground pipe and other chemical pollution prone areas, such as pavement, bridge cap, basement, swimming pool, retaining walls, waterproofing, etc.
CHARACTERISTICS
GK-KSW offers the following advantages:
* The reinforced concrete which is treated with GK-KSW features high strength and reduced shrinkage, which can effectively reduce the water absorption of concrete capillary, protect the internal reinforcement and facilitate the mass construction.
* Concrete treated with GK-KSW can effectively reduce water absorption and improve anti-penetration, inhibit corrosion for a prolonged time, and increase its durability, as well as reduce moisture content and maintain constant workability.
PRODUCT DATA
| Chemical Base | Aliphatic acid |
| Appearance/ Colour | Liquid/colorless to oyster white |
| Packaging | Barrel 225kg, IBC 1100kg or bulk |
| Storage conditions |
Store in dry conditions under the temperature of 5℃—25℃, protected from direct sunlight, water and frost. If above 25℃, it will dilation and demulsification. |
| Shelf- life |
At least 18 months if stored properly. If expired, it can only be used after inspection. |
| pH Value(at 25°C) | 8—10 |
| Solid Content | 3.5%—7.5% (See CoA for details) |
| Density (at 25C) | 1.0 ± 0.02g/cm3 |
| Setting time | ≥ 90min |
| Alkali content | ≤ 5.0% |
| Chloride Content | ≤ 0.2% |
| Sulfation Content | ≤ 0.1% |
| Water absorption (7d) | ≤ 1% |
| Ratio of absorption (48h) | ≤ 65% |
| Chloride diffusion coefficient | ≤ 3×10—12m2/s |
| Penetration height ratio | ≤ 30% |
| Ratio of bleeding rate | ≤ 50% |
| Ratio of shrinkage(28d) | ≤ 125% |
| Ratio of compressive strength |
3d ≥ 100% 7d ≥ 110% ≥ 28d ≥ 100% |
APPLICATION
RECOMMEND DOSAGE
30kg/m³ by weight
USING METHOD
1. Once the concrete treated with GK-KSW is molded, it is necessary to use thermal insulation materials and plastic film for thermal insulation and moisture curing.
2. Before construction, the concrete shall be tested and matched according to the concrete materials and conditions consistent with the actual conditions, so as to determine the optimal mixing ratio.
NOTES ON APPLICATION
1. GK-KSW should be sealed strictly before using.
2. Some precipitation or floating substance is normal, and
3. Before use, it should be thoroughly mixed.
4. It is compatible with all other GK products as following to reduce the moisture content of concrete and sand ash:
- GK - Air Entraining Agent
- GK - Deformer
- GK - Water Retention Agent
- GK - Pumping Agent.
LOCAL RESTRICTIONS
Please note that as a result of specific local regulations the declared data for this product may vary from country to country. Please consult the local Technical Data Sheet for the exact product data.
BASIS OF PRODUCT DATA
All technical data stated in this Technical Data Sheet are based on standard laboratory tests. Actual measured data may vary due to circumstances beyond our control.
HEALTH AND SAFETY
For information and advice on the safe handling, storage and disposal of chemical products, users should refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.
PROTECTIVE MEASURES
Avoid contact with skin. Please wash immediately with clear water when the product contacts skin and/or eyes. It should timely be taken medical treatment if any allergies and/or other adverse reactions happen.
ECOLOGY/WASTE DISPOSAL
Do not dispose of into water or soil, but according to local regulations.
TRANSPORTATION CLASS
Non-hazardous.
TOXICITY
Non-toxic.
DISCLAIMER：
The information, and, in particular, the recommendations relating to the application and end- use of Hydget products, are given in good faith based on Hydget’s current knowledge and experience of the products when properly stored,handled and applied under normal conditions in accordance with Hydget ’ s recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose,nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product ’s suitability for the intended application and purpose. Hydget reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Technical Data Sheet for the product concerned, copies of which will be supplied on request.
Hot Tags: GK-KSW Hydrophobic Compound Agent Functional materials, China, suppliers, manufacturers, factory, price, made in China
