When encountering customer inquiries, if we understand that the customer requires a specific cable type and each part of the code represents a specific meaning, we will provide a clear explanation of the code. Today, we will share the meaning of the cable type code and its representation.
Cable Code Example: H05RN-F3G0.75
H - Type: H represents HARMONIZED, A represents OTHER STD.
05 - Rated Voltage: 03–300/300V; 05–300/500V; 07–450/750V.
R - Basic Insulation Material: V=PVC (Polyvinyl Chloride), R=RUBBER, S=SI RUBBER.
N - Additional Insulation Material: N=POLYCHLOROPRENE RUBBER.
F - Conductor: F=soft wire, H=hard wire.
3 - Wires: G=with ground, X=without ground.
0.75 - Cross-sectional Area: 0.75 represents the cross-sectional area of the conductor in mm².
Cable Type Code: H03VVH2-F2X0.5
H - Type: H represents HARMONIZED, A represents OTHER STD.
03 - Rated Voltage: 03–300/300V; 05–300/500V; 07–450/750V.
R - Basic Insulation Material: V=PVC, R=RUBBER, S=SI RUBBER.
N - Additional Insulation Material: N=POLYCHLOROPRENE RUBBER, L=GLASS FIBER.
V - Additional Insulation Material: Same as above, multiple options available.
H - Flat Separate Cable, H2=Flat Non-Separate Cable.
F - Conductor: F=soft wire, H=hard wire.
2 - Wires: G=with ground, X=without ground.
0.5 - Cross-sectional Area: 0.5 represents the cross-sectional area of the conductor in mm².
We at HYDGET also sell bus duct products. Please purchase and consult through the following links.
