If you want to control the transformer to work in a normal environment, what needs to be paid attention to:
1. First, the altitude must be controlled within one kilometer;
2. The waveform of the transformer's power supply voltage is similar to a sine wave, which is easy to observe;
3. During the use of the transformer, try to avoid rain water, which will corrode the transformer;
4. The humidity of the transformer should be controlled below 40 degrees, and the humidity in the air should also be controlled below 50%. The lower the temperature, the greater the humidity;
5. The most suitable temperature to control the transformer is between minus 5 degrees and 40 degrees, and the average temperature of Meitian should be lower than 35 degrees. The normal temperature of each month should be controlled within 30 degrees, and the annual temperature should be controlled at Within twenty degrees;
6. The control transformer is generally installed in a higher geographical location, and to avoid rain corrosion, insulating gas and conductive dust, it is also necessary to install the transformer firmly and do not shake it.
